Some needs arrive with a clock on them.

A two-year-old in Singapore, living with Cohen Syndrome, has delayed motor skills that make standing difficult. Standing is not a milestone to tick off and move past — it is how a small child builds strength, balance, and confidence, and the window for building those things is right now, while the child is two.

A toddler wheelchair is the obvious answer, and it is also the wrong answer for this moment: expensive, slow to arrive, and quickly outgrown. By the time one is fitted and delivered, the child it was measured for has already changed.

So SalvageGarden volunteers printed a different answer.

The Toddler Mobility Trainer (TMT) is an open design from the MakeGood / Tikkun Olam Makers global platform — a small, 3D-printed mobility trainer that gives a toddler support to stand and move, built to a design anyone can download and print.

What is a Toddler Mobility Trainer (TMT)? poster showing the pink 3D-printed trainer
From the 18 April 2026 post, @salvagegardenmakerspace

In March 2026, SalvageGarden volunteers printed Southeast Asia’s first one, free, on their own printers — in light blue. The pink one, printed in late March, was made for this child.

The light blue Toddler Mobility Trainer frame in the SalvageGarden makerspace
Still from the 7 April 2026 reel, @salvagegardenmakerspace
The pink Toddler Mobility Trainer in the SalvageGarden makerspace
Photo: Saad Chinoy

That sentence carries the whole idea of this blog series. The device is the tangible way into the need: you can hold a mobility trainer in your hands and understand, immediately, what standing means to a two-year-old who cannot yet do it alone — and what it costs a family to wait for the off-the-shelf answer.

And the making is the point, not the printing. The design is open and printable anywhere; what is scarce is filament, print time, and assembly hands. The volunteers supplied all three. Donations to SalvageGarden go to filament, so more children get one — the same design, the same volunteer network, landing locally for the next child who needs it.

That is how a global open design lands in Singapore: not shipped in a box, but printed by neighbours, fitted for one child, in pink.

And the story didn’t stop with the first one. By August 2026, volunteers had printed five fully functional TMTs, in all shades of colours, and a sixth was already underway — each one made specially for the family it went to. The building has kept going since: as of November 2026, the group has built seven TMTs for Singapore families, each in colours its child picked — pink, blue, green and yellow, pink and purple.

What a maker can do

  • Print one. The TMT design is open, via 3d-mobility.org. If you have a printer, you have most of what this takes.
  • Give filament, print time, or assembly hands. The machine is not the bottleneck — the volunteer hours and the material are.
  • Share the pattern, not just the object. The post about this trainer is also a model: an open design from elsewhere, made local by a volunteer network, for one specific need.

Sources