Questions we hear most often about SalvageGarden, our Sunday sessions, and the devices we make together.

What is SalvageGarden?

SalvageGarden is a community makerspace in Singapore that co-creates open-source, 3D-printable assistive devices with persons with disabilities — not for them. It began in 2018 as a volunteer interest group and was formalised in 2022. Its guiding principle is “Nothing about us, without us”: the person who will use a device is at the centre of designing it.

What are Make Inclusive Tech (MIT) Sundays?

Free, weekly participatory design sessions run with SG Enable’s i’mable, where persons with disabilities, caregivers, makers, designers and clinicians work together to co-create assistive technology. The emphasis is on the process as much as the device: people learn, prototype and test together, and every design is shared openly so anyone can build on it.

When and where are the Sunday sessions?

Every Sunday, 12 noon to 2:30pm, at Punggol Regional Library, Level 4 (MakeIT @ Punggol), the flagship location. The other three libraries host a session once a month: Tampines Regional Library, Level 4, on the first Sunday of the month; Woodlands Regional Library, Level 3, on the second Sunday; and Jurong Regional Library, Level 2, on the third Sunday. Find upcoming sessions by searching “Make Inclusive Tech” on the NLB calendar portal. Walk in or wheel in.

Do I need any experience or equipment?

No. No prior technical knowledge or maker experience is necessary, and you don’t need your own tools — the libraries provide 3D printers, laser cutters and other fabrication equipment. Lived experience and creative thinking are valued as highly as technical expertise.

How much does it cost?

Nothing. The Sunday sessions are free, and every device design is open source — free to print, adapt and fit.

I — or someone I care for — need an assistive device. How do I get one made?

Bring the need to a Sunday session. Volunteers sit down with the person who will use the device and their caregiver, work out what would actually help in daily life, and prototype it together over one or more sessions. The device is fitted by hand to the person, and the design is shared openly so others with the same need can build it too.

Can I print a SalvageGarden device myself?

Yes. There are 140+ designs, and the files are linked in each device’s blog post and in the SalvageGarden Printables collection. They are free to print, adapt and fit — though many devices need adjusting or fitting for the individual, so if you’re making one for someone else, it’s worth coming to a session or getting in touch first.

What kinds of devices have you made?

Everything from a wheelchair poncho that deploys in under 30 seconds, to a braille embosser built from a repurposed 3D printer for about US$350, to a 3D-printed Toddler Mobility Trainer, a keyhole finder, a pen holder for a child who can’t grip a pen, and a coin sorter that tells Singapore coins apart by touch. See all fourteen in “Our assistive devices“, with the story behind each one on the “blog“.

How can I volunteer or support SalvageGarden?

Come to a Sunday session — makers, designers, clinicians and curious newcomers are all welcome, and no experience is needed. You can also support the work financially via the “Donate” page.

How do I get in touch?

Use the “contact form” — or simply come to a Sunday session and talk to the volunteers there.