Imagine being seven years old, and wanting to write and draw — and not being able to hold a pen.

Holding a pen looks like the simplest thing in the world, until your fingers will not do it. A standard pen asks for a pinch grip, steady fingers, a hand that does what you tell it. For a child who cannot grip a pen, that is not a small inconvenience. It is the door to writing, drawing, schoolwork, making a mark — closed.

So the makers at SalvageGarden started not with a printer, but with their own arms.

That is the part of this story we love most. Before anyone printed anything, the participants taped pens onto their own arms — to feel, in their own bodies, what it is like to try to write without fingers to grip with. Empathy, not as a word in a workshop plan, but as tape on skin, a pen wobbling where a hand should be holding it. Only then did they prototype, quickly, a wearable version of the Glifo writing tool — a holder that lets a child write and draw without needing fingers to grip the pen at all.

Glifo itself comes from Milan. It was first developed in 2014 by OpenDot FabLab together with the TOG Foundation, with makers, therapists, designers and families of children with complex neurological disorders working together — a 3D-printed, custom-made writing aid, made to fit one child at a time, so that child could write and draw on their own. The idea was simple and stubborn: a child should be able to leave their own mark. The SalvageGarden version takes that idea and adapts it: a without-fingers holder, prototyped in the session, fitted to the child who needed it, not to a shelf.

That is what a maker can do that a shop cannot. A shop sells a pen holder in three sizes. A session watches a child try to write, tapes a pen to an arm to understand why it is hard, and prints a holder shaped around that child’s hand, that child’s arm, that child’s pen. The fitting is the making — and the child is in the room while it happens, trying it, telling the makers what works.

So if writing has become a job someone else does for a child you know, bring that child to a session. We will tape a pen to our own arms first, if that is what it takes to understand — and then we will print a holder together, until the pen stays put and the page starts filling up with their own marks.

What a maker can do

  • Feel the problem first. Tape a pen to your own arm and try to write with it. It is the fastest way to learn what “can’t grip a pen” actually means — and it changes what you print next.
  • Start from Glifo, then adapt it. The original Glifo is a custom-made, 3D-printed writing aid from OpenDot and TOG in Milan — read how it was co-designed with therapists and families before adapting it, rather than starting from a blank page.
  • Build the SalvageGarden version. Our own remix, the Amber mod, is a clamp-shaped cuff for wrist and transradial limb differences that straps on to the end of the arm in place of the hand — co-created at a Make Inclusive Tech Sunday at Punggol Library with a father-daughter team, and now on its third iteration. The files are on Printables: https://www.printables.com/model/616768-amber-mod-for-glifo-pen-holder
  • Make it wearable, not hand-held. The SalvageGarden version is worn, so the pen is held without fingers. Fit it to the child’s arm and hand, and to the pen or marker they actually want to use — one child, one fit.
  • Prototype it in the session, with the child there. Print it fast, try it on paper the same day, and change it on the spot. The test that matters is a child writing and drawing, not a holder that looks right on a screen.

Sources